Tuning Samples
Standard tuning samples for non-destructive testing
| Product | Article | Description |
| СО-2 | TB0170098 | Material: Ст20 |
| СО-3 | TB0170099 | Material: Ст20 |
| КУ-1-13 | TB0170100 | Material: Ст20 |
| 2111М | TB0170101 | Material: 08Х18Н10Т |
| V1 |
TB0210001 |
- |
| V2 | TB0170102 | Material: Ст20 |
| V2-A | TB0170103 | Material: 08Х18Н10Т |
| - | 840.44 М-Р 325 | Material: ТВ0200019 |
| НО-М170 | TB023001 | To adjust the sensitivity of ultrasonic monitoring |
| НО-219-А | TB0200016 | It is made of a fragment of an austenitic pipeline welded joint with an outer diameter of 219 mm, designed to adjust the sensitivity of monitoring and determine the permissible length of fixed discontinuities in annular austenitic welded joints during automated ultrasonic testing in accordance with the MFAR methodology.AE12.T2M/2-K-11. |
| НО-245-А | TB0200017 | It is made of a fragment of an austenitic pipeline welded joint with an outer diameter of 245 mm, designed to adjust the sensitivity of monitoring and determine the permissible length of fixed discontinuities in annular austenitic welded joints during automated ultrasonic testing in accordance with the MFAR methodology.AE12.T2M/2-K-11. |
| НО-273-А | TB0200018 | It is made of a fragment of an austenitic pipeline welded joint with an outer diameter of 273 mm, designed to adjust the sensitivity of monitoring and determine the permissible length of fixed discontinuities in annular austenitic welded joints during automated ultrasonic testing in accordance with the MFAR methodology.AE12.T2M/2-K-11. |
| НО-Л1 А20-57-Б2П2-У | TB0170104 |
A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: austenitic welded joints Ø57 mm with a thickness of welded parts from 5.5 to 10 mm inclusive. The material of the sample is austenitic steel. The radius of curvature of the scanning surface is 28.5 mm. Dimensions (Length x Width x Thickness): 260x50x20 mm. End face No. 1 – angle 60O, end face No. 2 – R = 20 mm. Reflectors: 1.Side cylindrical holes: Ø2mm, quantity – 7pcs. at depths of– 3; 5; 7; 9; 10,5; 12; 13,5; 15mm. 2. Flat–bottomed holes: Ø2mm, quantity - 2pcs. at depths - 5; 915 mm. |
| НО-Л1-А20-76-Б2П2-У | TB0170105 |
A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: austenitic welded joints Ø76mm with a thickness of welded parts from 5.5 to 10 mm inclusive. The material of the sample is austenitic steel. The radius of curvature of the scanning surface is -38 mm. Dimensions (Length x Width x Thickness): 260x50x20 mm. End face No. 1 – angle 60O, end face No. 2 – R = 20 mm. Reflectors: 1. Side cylindrical holes: Ø2mm, quantity – 7pcs. at depths of – 3; 7; 9; 10,5; 12; 13,5; 1510; 13mm. 2. Flat–bottomed holes: Ø2mm, quantity - 2pcs. at depths - 5; 15mm. |
| НО-Л1-А20-89-Б2П2-У | TB0170106 |
A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: austenitic welded joints Ø89mm with a thickness of welded parts from 5.5 to 10 mm inclusive. The material of the sample is austenitic steel. The radius of curvature of the scanning surface is 44.5 mm. Dimensions (Length x Width x Thickness): 260x50x20 mm. End face No. 1 – angle 60O, end face No. 2 – R = 20 mm. Reflectors: 1. side cylindrical holes: Ø2mm, quantity – 7pcs. at depths of – 3; 5; 9; 10,5; 12; 13,5; 15mm. 2. flat–bottomed holes: Ø2mm, quantity - 2 pcs. at depths - 5; 15mm. |
| НО-Л1-А20-108-Б2П2-У | TB0170001 |
A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: austenitic and composite welded joints Ø108mm with a thickness of welded parts from 5.5 to 10 mm inclusive. The material of the sample is austenitic steel. The radius of curvature of the scanning surface is 54 mm. Dimensions: length, width, thickness: 260x50x20mm. End face No. 1 – angle 60O, end face No. 2 – R = 20mm. Reflectors: 1. side cylindrical holes: Ø2mm, quantity – 7pcs. at depths of – 3; 5; 9; 10,5; 12; 13,5; 15mm. 2. flat–bottomed holes: Ø2mm, quantity - 2 pcs. at depths - 5; 15mm. |
| НО-Л1-А20-133-Б2П2-У | TB0170002 |
A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: austenitic and composite welded joints Ø133mm with a thickness of welded parts from 5.5 to 10 mm inclusive. The material of the sample is austenitic steel. The radius of curvature of the scanning surface is 66.5 mm. Dimensions: length, width, thickness: 260x50x20mm. End face No. 1 – angle 60O, end face No. 2 – R = 20mm. Reflectors:1. боковые цилиндрические отверстия: Ø2мм, количество – 7шт. на глубинах – 3; 5; 9; 10,5; 12; 13,5; 15мм. 2. плоскодонные отверстия: Ø2мм, количество – 2шт. на глубинах – 5; 15мм. |
| НО-Л1-А20-159-Б2П2-У | TB0170003 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: austenitic and composite welded joints Ø159mm with a thickness of welded parts from 5.5 to 10 mm inclusive. The material of the sample is austenitic steel. The radius of curvature of the scanning surface is 79.5 mm. Dimensions: length, width, thickness: 260x50x20mm. End face No. 1 – angle 60O, end face No. 2 – R = 20mm. Reflectors: 1. Side cylindrical holes: Ø2mm, quantity – 7pcs. at depths of – 3; 5; 9; 10,5; 12; 13,5; 15mm. 2. flat–bottomed holes: Ø2mm, quantity - 2 pcs. at depths - 5; 15mm. |
| НО-Л1-А20-219-Б2П2-У | TB0170004 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: austenitic and composite welded joints Ø219mm with a thickness of welded parts from 5.5 to 10 mm inclusive. The material of the sample is austenitic steel. The radius of curvature of the scanning surface is 109.5 mm. Dimensions: length, width, thickness: 260x50x20mm. End face No. 1 – angle 60O, end face No. 2 – R = 20mm. Reflectors: 1. Side cylindrical holes: Ø2mm, quantity – 7pcs. at depths of – 3; 5; 9; 10,5; 12; 13,5; 15mm. 2. flat–bottomed holes: Ø2mm, quantity - 2 pcs. at depths - 5; 15mm. |
| НО-Л1-А20-273-Б2П2-У | TB0170005 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: austenitic and composite welded joints Ø273mm with a thickness of welded parts from 5.5 to 10 mm inclusive. The material of the sample is austenitic steel. The radius of curvature of the scanning surface is 136.5mm. Dimensions: length, width, thickness: 260x50x20mm. End face No. 1 – angle 60O, end face No. 2 – R = 20mm. Reflectors: 1. Side cylindrical holes: Ø2mm, quantity – 7pcs. at depths of – 3; 5; 9; 10,5; 12; 13,5; 15mm. 2. flat–bottomed holes: Ø2mm, quantity - 2 pcs. at depths - 5; 15mm. |
| НО-Л1-А20-ПЛ-Б2П2-У | TB0170089 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: austenitic and composite welded joints with Dn>400mm with a thickness of welded parts from 5.5 to 10 mm inclusive. The material of the sample is austenitic steel. The scanning surface is flat. Dimensions: length, width, thickness: 260x50x20mm. End face No. 1 – angle 60O, end face No. 2 – R = 20mm. Reflectors: 1. Side cylindrical holes: Ø2mm, quantity – 7pcs. at depths of – 3; 5; 9; 10,5; 12; 13,5; 15mm. 2. flat–bottomed holes: Ø2mm, quantity - 2 pcs. at a depth of 5; 15mm. |
| НО-Л1-А40-133-Б3П3-У | ТB0170069 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: austenitic and composite welded joints Ø133mm with a thickness of welded parts greater than 10 to 20 mm inclusive. The material of the sample is austenitic steel. The radius of curvature of the scanning surface is 66.5 mm. Dimensions, mm: length, width, thickness: 290x50x40. End face No. 1 – angle 60O, end face No. 2 – R = 40mm. Reflectors: 1. Side cylindrical holes: Ø3mm, quantity – 12pcs. at depths – 5; 7, 9; 11; 13; 17; 20; 22; 25; 27; 29; 32mm. 2. Flat–bottomed holes: Ø3mm, quantity - 2pcs. at a depth of 13; 32mm. |
| НО-Л1-А40-159-Б3П3-У | ТB0170070 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: austenitic and composite welded joints Ø159mm with a thickness of welded parts greater than 10 to 20 mm inclusive. The material of the sample is austenitic steel. The radius of curvature of the scanning surface is 79.5 mm. Dimensions, mm: length, width, thickness: 290x50x40. End face No. 1 – angle 60 O, end face No. 2 – R = 40mm. Reflectors: 1. Side cylindrical holes: Ø3mm, quantity – 12pcs. at depths – 5; 7, 9; 11; 13; 17; 20; 22; 25; 27; 29; 32mm. 2. Flat–bottomed holes: Ø3mm, quantity - 2pcs. at depths – 13; 32mm. 1 piece |
| НО-Л1-А40-219-Б3П3-У | ТB0170071 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: austenitic and composite welded joints Ø219mm with a thickness of welded parts greater than 10 to 20 mm inclusive.. The material of the sample is austenitic steel. The radius of curvature of the scanning surface is 109.5 mm. Dimensions, mm: length, width, thickness: 290x50x40. End face No. 1 – angle 60O, end face No. 2 – R = 40mm. Reflectors: 1. Side cylindrical holes: Ø3mm, quantity – 12pcs. at depths – 5; 7, 9; 11; 13; 17; 20; 22; 25; 27; 29; 32mm. 2. Flat–bottomed holes: Ø3mm, quantity - 2pcs. at depths - 13; 32mm. |
| НО-Л1-А40-245-Б3П3-У | TB0170107 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: austenitic welded joints Ø245mm with a thickness of welded parts greater than 10 to 20 mm inclusive. The material of the sample is austenitic steel. The radius of curvature of the scanning surface is 122.5 mm. Dimensions, mm: length, width, thickness: 290x50x40. End face No. 1 – angle 60O, end face No. 2 – R = 40mm. Reflectors: 1. Side cylindrical holes: Ø3mm, quantity – 12pcs. at depths– 5; 7, 9; 11; 13; 17; 20; 22; 25; 27; 29; 32mm. 2. flat–bottomed holes: Ø3mm, quantity - 2 pcs. at depths - 13; 32mm. |
| НО-Л1-А40-273-Б3П3-У | ТB0170072 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: austenitic and composite welded joints Ø273mm with a thickness of welded parts greater than 10 to 20 mm inclusive. The material of the sample is austenitic steel. The radius of curvature of the scanning surface is 136.5 mm. Dimensions, mm: length, width, thickness: 290x50x40. End face No. 1 – angle 60O, end face No. 2 – R = 40mm. Reflectors: 1. Side cylindrical holes: Ø3mm, quantity – 12pcs. at depths – 5; 7, 9; 11; 13; 17; 20; 22; 25; 27; 29; 32mm. 2. Flat–bottomed holes: Ø3mm, quantity - 2pcs. at depths - 13; 32mm. |
| НО-Л1-А40-325-Б3П3-У | ТB0170073 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: austenitic and composite welded joints Ø325mm with a thickness of welded parts greater than 10 to 20 mm inclusive. The material of the sample is austenitic steel. The radius of curvature of the scanning surface is 162.5 mm. Dimensions, mm: length, width, thickness: 290x50x40. End face No. 1 – angle 60O, end face No. 2 – R = 40mm. Reflectors: 1. Side cylindrical holes: Ø3mm, quantity – 12pcs. at depths – 5; 7, 9; 11; 13; 17; 20; 22; 25; 27; 29; 32mm. 2. Flat–bottomed holes: Ø3mm, quantity - 2pcs. at depths - 13; 32mm. |
| НО-Л1-А40-ПЛ-Б3П3-У | TB0170091 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: austenitic and composite welded joints with Dn>400mm with a thickness of welded parts greater than 10 to 20 mm inclusive. The material of the sample is austenitic steel. The scanning surface is flat. Dimensions, mm: length, width, thickness: 290x50x40. End face No. 1 – angle 60O, end face No. 2 – R = 40mm. Reflectors: 1. Side cylindrical holes: Ø3mm, quantity – 12pcs. at depths – 5; 7, 9; 11; 13; 17; 20; 22; 25; 27; 29; 32mm. 2. flat–bottomed holes: Ø3mm, quantity - 2 pcs. at depths - 13; 32mm. |
| НО-Л1-П20-108-Б2П2-У | TB0170007 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: composite welded joints Ø108mm with a thickness of welded parts from 5.5 to 10 mm inclusive. The material of the sample is pearlite grade steel. The radius of curvature of the scanning surface is 54 mm. Dimensions: length, width, thickness: 260x50x20mm. End face No. 1 – angle 60O, end face No. 2 – R = 20mm. Reflectors: 1. Side cylindrical holes: Ø2mm, quantity – 7pcs. at depths of – 3; 5; 9; 10,5; 12; 13,5; 15mm. 2. flat–bottomed holes: Ø2mm, quantity - 2 pcs. at depths - 5; 15mm. |
| НО-Л1-П20-133-Б2П2-У | TB0170008 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: composite welded joints Ø133mm with a thickness of welded parts from 5.5 to 10 mm inclusive. The material of the sample is pearlite grade steel. The radius of curvature of the scanning surface is 66.5 mm. Dimensions: length, width, thickness: 260x50x20mm. End face No. 1 – angle 60O, end face No. 2 – R = 20mm. Reflectors: 1. Side cylindrical holes: Ø2mm, quantity – 7pcs. at depths of – 3; 5; 9; 10,5; 12; 13,5; 15mm. 2. flat–bottomed holes: Ø2mm, quantity - 2 pcs. at depths - 5; 15mm. |
| НО-Л1-П20-159-Б2П2-У | TB0170009 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: composite welded joints Ø159mm with a thickness of welded parts from 5.5 to 10 mm inclusive. The material of the sample is pearlite grade steel. The radius of curvature of the scanning surface is 79.5 mm. Dimensions: length, width, thickness: 260x50x20mm. End face No. 1 – angle 60O, end face No. 2 – R = 20mm. Reflectors: 1. Side cylindrical holes: Ø2mm, quantity – 7pcs. at depths of – 3; 5; 9; 10,5; 12; 13,5; 15mm. 2. flat–bottomed holes: Ø2mm, quantity - 2 pcs. at depths - 5; 15mm. |
| НО-Л1-П20-219-Б2П2-У | TB0170010 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: composite welded joints Ø219mm with a thickness of welded parts from 5.5 to 10 mm inclusive. The material of the sample is perlite steel. The radius of curvature of the scanning surface is 109.5 mm. Dimensions: length, width, thickness: 260x50x20mm. End face No. 1 – angle 60O, end face No. 2 – R = 20mm. Reflectors: 1. Side cylindrical holes: Ø2mm, quantity – 7pcs. at depths of – 3; 5; 9; 10,5; 12; 13,5; 15mm. 2. flat–bottomed holes: Ø2mm, quantity - 2 pcs. at depths - 5; 15mm. |
| НО-Л1-П20-273-Б2П2-У | TB0170011 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: composite welded joints Ø273mm with a thickness of welded parts from 5.5 to 10 mm inclusive. The material of the sample is pearlite grade steel. The radius of curvature of the scanning surface is 136.5mm. Dimensions: length, width, thickness: 260x50x20mm. End face No. 1 – angle 60O, end face No. 2 – R = 20mm. Reflectors: 1. Side cylindrical holes: Ø2mm, quantity – 7pcs. at depths of – 3; 5; 9; 10,5; 12; 13,5; 15mm. 2. flat–bottomed holes: Ø2mm, quantity - 2 pcs. at depths - 5; 15mm. |
| НО-Л1-П20-ПЛ-Б2П2-У | TB0170088 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: composite welded joints with Dn>400mm with a thickness of welded parts from 5.5 to 10 mm inclusive. The material of the sample is pearlite grade steel. The scanning surface is flat. Dimensions: length, width, thickness: 260x50x20mm. End face No. 1 – angle 60O, end face No. 2 – R = 20mm. Reflectors: 1. Side cylindrical holes: Ø2mm, quantity – 7pcs. at depths of – 3; 5; 9; 10,5; 12; 13,5; 15mm. 2. flat–bottomed holes: Ø2mm, quantity - 2 pcs. at depths - 5; 15mm. |
| НО-Л1-П40-219-Б3П3-У | ТB0170077 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: composite welded joints Ø219mm with a thickness of welded parts greater than 10 to 20 mm inclusive. The material of the sample is pearlite grade steel. The radius of curvature of the scanning surface is 109.5 mm. Dimensions, mm: length, width, thickness: 290x50x40. End face No. 1 – angle 60O, end face No. 2 – R = 40mm. Reflectors: 1. Side cylindrical holes: Ø3mm, quantity – 12pcs. at depths – 5; 7, 9; 11; 13; 17; 20; 22; 25; 27; 29; 32mm. 2. flat–bottomed holes: Ø3mm, quantity - 2 pcs. at depths - 13; 32mm. |
| НО-Л1-П40-273-Б3П3-У | ТB0170078 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: composite welded joints Ø273mm with a thickness of welded parts greater than 10 to 20 mm inclusive. The material of the sample is pearlite grade steel. The radius of curvature of the scanning surface is 136.5 mm. Dimensions, mm: length, width, thickness: 290x50x40. End face No. 1 – angle 60O, end face No. 2 – R = 40mm. Reflectors: 1. Side cylindrical holes: Ø3mm, quantity – 12pcs. at depths – 5; 7, 9; 11; 13; 17; 20; 22; 25; 27; 29; 32mm. 2. flat–bottomed holes: Ø3mm, quantity - 2 pcs. at depths - 13; 32mm. |
| НО-Л1-П40-325-Б3П3-У | ТB0170079 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: composite welded joints Ø325mm with a thickness of welded parts greater than 10 to 20 mm inclusive. The material of the sample is pearlite grade steel. The radius of curvature of the scanning surface is 162.5 mm. Dimensions, mm: length, width, thickness: 290x50x40. End face No. 1 – angle 60O, end face No. 2 – R = 40mm. Reflectors: 1. Side cylindrical holes: Ø3mm, quantity – 12pcs. at depths – 5; 7, 9; 11; 13; 17; 20; 22; 25; 27; 29; 32mm. 2. flat–bottomed holes: Ø3mm, quantity - 2 pcs. at depths - 13; 32mm. |
| НО-Л1-П40-ПЛ-Б3П3-У | TB0170090 | A unified tuning sample of the "spoon" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 10 NP-084-15. Object of control: composite welded joints with Dn>400mm with a thickness of welded parts more than 10 to 20 mm inclusive. The material of the sample is pearlite grade steel. The scanning surface is flat. Dimensions, mm: length, width, thickness: 290x50x40. End face No. 1 – angle 60O, end face No. 2 – R = 40mm. Reflectors: 1. Side cylindrical holes: Ø3mm, quantity – 12pcs. at depths – 5; 7, 9; 11; 13; 17; 20; 22; 25; 27; 29; 32mm. 2. flat–bottomed holes: Ø3mm, quantity - 2 pcs. at depths - 13; 32mm. |
| НО-К70-П35-89-П2П3 | TB0170108 | A unified tuning sample of the "ship" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 9 NP-084-15. Object of control: pearlitic welded joints 89mm with a thickness of welded parts more than 5.5 to 10 mm inclusive. The material of the sample is pearlite grade steel.The radius of curvature of the scanning surface is 44.5 mm. Dimensions, mm: length, width, thickness: 220x35x30. Reflectors: 1. End face No. 1 – angle 70O, flat–bottomed holes: Ø2mm (Seqv=3,5mm2), quantity - 4 pcs. at depths - 5; 10, 15, 20mm. 2. End face No. 2 – angle 70O, flat–bottomed holes: Ø3mm (Seqv=7,0mm2), quantity - 4 pcs. at depths - 5; 10, 15, 20mm. |
| НО-К70-П30-108-П2П3 | TB0170109 | A unified tuning sample of the "ship" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 9 NP-084-15. Object of control: pearlitic welded joints of 108mm with a thickness of welded parts of more than 5.5 to 10 mm inclusive. The material of the sample is pearlite grade steel.The radius of curvature of the scanning surface is 54 mm. Dimensions, mm: length, width, thickness: 220x35x30. Reflectors: 1. End face No. 1 – angle 70O, flat–bottomed holes: Ø2mm (Seqv=3,5mm2), quantity - 4 pcs. at depths - 5; 10, 15, 20mm. 2. End face No. 2 – angle 70O, flat–bottomed holes: Ø3mm (Seqv=7,0mm2), quantity - 4 pcs. at depths - 5; 10, 15, 20mm. |
| НО-К70-П30-133-П2П3 | TB0170110 | A unified tuning sample of the "ship" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 9 NP-084-15. Object of control: pearlitic welded joints of 133mm with a thickness of welded parts of more than 5.5 to 10 mm inclusive. The material of the sample is pearlite grade steel.The radius of curvature of the scanning surface is 66.5 mm. Dimensions, mm: length, width, thickness: 220x35x30. Reflectors: 1. End face No. 1 – angle 70O, flat–bottomed holes: Ø2mm (Seqv=3,5mm2), quantity - 4 pcs. at depths - 5; 10, 15, 20mm. 2. End face No. 2 – angle 70O, flat–bottomed holes: Ø3mm (Seqv=7,0mm2), quantity - 4 pcs. at depths - 5; 10, 15, 20mm. |
| НО-К70-П30-159-П2П3 | TB0170111 | A unified tuning sample of the "ship" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 9 NP-084-15. Object of control: pearlitic welded joints of 159mm with a thickness of welded parts greater than 5.5 to 10 mm inclusive. The material of the sample is pearlite grade steel.The radius of curvature of the scanning surface is Ø79.5 mm. Dimensions, mm: length, width, thickness: 220x35x30. Reflectors: 1. End face No. 1 – angle 70O, flat–bottomed holes: Ø2mm (Seqv=3,5mm2), quantity - 4 pcs. at depths - 5; 10, 15, 20mm. 2. End face No. 2 – angle 70O, flat–bottomed holes: Ø3mm (Seqv=7,0mm2), quantity - 4 pcs. at depths - 5; 10, 15, 20mm. |
| НО-К70-П30-219-П2П3 | TB0170112 | A unified tuning sample of the "ship" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 9 NP-084-15. Object of control: pearlitic welded joints of 2219mm with a thickness of welded parts greater than 5.5 to 10 mm inclusive. The material of the sample is pearlite grade steel.The radius of curvature of the scanning surface is 109.5 mm. Dimensions, mm: length, width, thickness: 220x35x30. Reflectors: 1. End face No. 1 – angle 70O, flat–bottomed holes: Ø2mm (Seqv=3,5mm2), quantity - 4 pcs. at depths - 5; 10, 15, 20mm. 2. End face No. 2 – angle 70O, flat–bottomed holes: Ø3mm (Seqv=7,0mm2), quantity - 4 pcs. at depths - 5; 10, 15, 20mm. |
| НО-К70-П30-273-П2П3 | TB0170113 | A unified tuning sample of the "ship" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 9 NP-084-15. Object of control: pearlite welded joints of 273mm with a thickness of welded parts greater than 5.5 to 10 mm inclusive. The material of the sample is pearlite grade steel.The radius of curvature of the scanning surface is 136.5 mm. Dimensions, mm: length, width, thickness: 220x35x30. Reflectors: 1. End face No. 1 – angle 70O, flat–bottomed holes: Ø2mm (Seqv=3,5mm2), quantity - 4 pcs. at depths - 5; 10, 15, 20mm. 2. End face No. 2 – angle 70O, flat–bottomed holes: Ø3mm (Seqv=7,0mm2), quantity - 4 pcs. at depths - 5; 10, 15, 20mm. |
| НО-К70-П30-325-П2П3 | TB0170114 | A unified tuning sample of the "ship" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 9 NP-084-15. Object of control: pearlite welded joints Ø325mm with a thickness of welded parts more than 5.5 to 10 mm inclusive. The material of the sample is pearlite grade steel. The radius of curvature of the scanning surface is 162.5 mm. Dimensions, mm: length, width, thickness: 220x35x30. Reflectors: 1. End face No. 1 – angle 70O, flat–bottomed holes: Ø2mm (Seqv=3,5mm2), quantity - 4 pcs. at depths - 5; 10, 15, 20mm. 2. End face No. 2 – angle 70O, flat–bottomed holes: Ø3mm (Seqv=7,0mm2), quantity - 4 pcs. at depths - 5; 10, 15, 20mm. |
| НО-К70-П30-ПЛ-П2П3 | TB0170115 | A unified tuning sample of the "ship" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 9 NP-084-15. Object of control: pearlite welded joints with a thickness of welded parts greater than 5.5 to 10 mm inclusive. The material of the sample is pearlite grade steel. The scanning surface is flat. Dimensions, mm: length, width, thickness: 220x35x30. Reflectors: 1. End face No. 1 – angle 70O, flat–bottomed holes: Ø2mm (Seqv=3,5mm2), quantity - 4 pcs. at depths - 5; 10, 15, 20mm. 2. End face No. 2 – angle 70O, flat–bottomed holes: Ø3mm (Seqv=7,0mm2), quantity - 4 pcs. at depths - 5; 10, 15, 20mm. |
| НО-К70-П70-219-П2П3 | TB0170116 | A unified tuning sample of the "ship" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 9 NP-084-15. Object of control: pearlitic welded joints of 2219mm with a thickness of welded parts of more than 10 to 20 mm inclusive. The material of the sample is pearlite grade steel.The radius of curvature of the scanning surface is 109.5 mm. Dimensions, mm: length, width, thickness: 280x35x70. Reflectors: 1. End face No. 1 – angle 70O, flat–bottomed holes: Ø2.5mm (Seq=5.0 mm2), quantity - 9pcs. at depths of – 5, 10, 15, 20, 25, 30, 35, 40, 45mm. 2. End face No. 2 – angle 70O, flat–bottomed holes: Ø3.6mm (Seq=10.0mm2), quantity - 9pcs. at depths of – 5, 10, 15, 20, 25, 30, 35, 40, 45mm. |
| НО-К70-П70-273-П2П3 | TB0170117 | A unified tuning sample of the "ship" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 9 NP-084-15. Object of control: pearlitic welded joints of 273mm with a thickness of welded parts of more than 10 to 20 mm inclusive. The material of the sample is pearlite grade steel.The radius of curvature of the scanning surface is 136.5 mm. Dimensions, mm: length, width, thickness: 280x35x70. Reflectors: 1. End face No. 1 – angle 70O, flat–bottomed holes: Ø2.5mm (Seq=5.0 mm2), quantity - 9pcs. at depths of – 5, 10, 15, 20, 25, 30, 35, 40, 45mm. 2. End face No. 2 – angle 70O, flat–bottomed holes: Ø3.6mm (Seq=10.0mm2), quantity - 9pcs. at depths of – 5, 10, 15, 20, 25, 30, 35, 40, 45mm. |
| НО-К70-П70-325-П2П3 | TB0170118 | A unified tuning sample of the "ship" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 9 NP-084-15. Object of control: pearlitic welded joints 325mm with a thickness of welded parts more than 10 to 20 mm inclusive. The material of the sample is pearlite grade steel.The radius of curvature of the scanning surface is 162.5 mm. Dimensions, mm: length, width, thickness: 280x35x70. Reflectors: 1. End face No. 1 – angle 70O, flat–bottomed holes: Ø2.5mm (Seq=5.0 mm2), quantity - 9pcs. at depths of – 5, 10, 15, 20, 25, 30, 35, 40, 45mm. 2. End face No. 2 – angle 70O, flat–bottomed holes: Ø3.6mm (Seq=10.0mm2), quantity - 9pcs. at depths of – 5, 10, 15, 20, 25, 30, 35, 40, 45mm. |
| НО-К70-П70-ПЛ-П2П3 | TB0170119 | A unified tuning sample of the "ship" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 9 NP-084-15. Object of control: pearlite welded joints with a thickness of welded parts greater than 10 to 40 mm inclusive. The material of the sample is pearlite grade steel. The scanning surface is flat. Dimensions, mm: length, width, thickness: 280x35x70. Reflectors: 1. End face No. 1 – angle 70O, flat–bottomed holes: Ø2.5mm (Seq=5.0 mm2), quantity - 9pcs. at depths of – 5, 10, 15, 20, 25, 30, 35, 40, 45mm. 2. End face No. 2 – angle 70O, flat–bottomed holes: Ø3.6mm (Seq=10.0mm2), quantity - 9pcs. at depths of – 5, 10, 15, 20, 25, 30, 35, 40, 45mm. |
| НО-К45-П120-ПЛ-П2П3 | TB0170120 | A unified tuning sample of the "ship" type for adjusting the sensitivity of ultrasonic testing in accordance with the norms of Table No. 9 NP-084-15. Object of control: pearlite welded joints with a thickness of welded parts greater than 10 to 40 mm inclusive. The material of the sample is pearlite grade steel. The scanning surface is flat. Dimensions, mm: length, width, thickness: 360x35x120. Reflectors: 1. End face No. 1 – angle 45O, flat–bottomed holes: Ø2.5mm (Seq=5.0 mm2), quantity - 10 pcs. at depths of – 10, 20, 30, 40, 50, 60, 70, 80, 90, 100mm. 2. End face No. 2 – angle 45O, flat–bottomed holes: Ø3.6mm (Seq=10.0mm2), quantity - 9pcs. at depths of – 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 mm. |
| НО-М48-ПГВ-1000 | TB0170121 | A unified tuning sample for adjusting the sensitivity of the ultrasonic inspection of the M48 stud (with axial drilling) of the flange connector of the PGV-1000 steam generator manhole in accordance with the norms of Table No. 12 NP-084-15. The material of the sample is 38KHN3MFA steel. Reflectors: 1. Groove No. 1 with a depth of 1.7mm in the threaded part of the stud; 2. Groove No. 2 with a depth of 1.7 mm in the shaft part of the stud; 3. Groove No. 3 with a depth of 1.7mm of the axial drilling surface of the stud;4. Flat–bottomed reflector Ø3.0mm (Seqv=7.0mm2) – for direct PEP control, quantity - 1 piece at a depth of 10mm; 5. End-to-end vertical drilling Ø4.0mm to adjust the depth gauge and the scanning speed. |
| НО-М52-ПГВ-1000 | TB0170122 | Unified tuning sample for adjusting the sensitivity of ultrasonic inspection of the M52 stud (with axial drilling) of the flange connector 2 of the PGV-1000 steam generator circuit in accordance with the norms of Table No. 12 NP-084-15. The material of the sample is 38KHN3MFA steel. Reflectors: 1. Groove No. 1 with a depth of 1.7mm in the threaded part of the stud; 2. Groove No. 2 with a depth of 1.7 mm in the shaft part of the stud; 3. Groove No. 3 with a depth of 1.7mm of the axial drilling surface of the stud;4. Flat–bottomed reflector Ø4.4mm (Seqv=15.0mm2 – for direct PEP control, quantity - 1 piece at a depth of 10mm; 5. End-to-end vertical drilling Ø4.0mm to adjust the depth gauge and the scanning speed. |
| НО-М60-ПГВ-1000 | TB0170123 | Unified tuning sample for adjusting the sensitivity of ultrasonic inspection of the M60 stud (with axial drilling) of the flange connector 1 of the PGV-1000 steam generator circuit in accordance with the norms of Table No. 12 NP-084-15. The material of the sample is 38KHN3MFA steel.Reflectors: 1. Groove No. 1 with a depth of 1.7mm in the threaded part of the stud; 2. Groove No. 2 with a depth of 1.7 mm in the shaft part of the stud; 3. Groove No. 3 with a depth of 1.7mm of the axial drilling surface of the stud; 4. Flat–bottomed reflector Ø4.4mm (Seqv=15.0mm2 – for direct PEP control, quantity - 1 piece at a depth of 10mm; 5. End-to-end vertical drilling Ø4.0mm to adjust the depth gauge and the scanning speed. |
| НО-М48-САОЗ | TB0170124 | A unified tuning sample for adjusting the sensitivity of the ultrasonic inspection of the M48 stud (without axial drilling) of the GE SAOZ flange connector in accordance with the norms of Table No. 12 NP-084-15. The material of the sample is 38KHN3MFA steel. Reflectors: 1. Groove No. 1 with a depth of 1.7mm in the threaded part of the stud; 2. Groove No. 2 with a depth of 1.7 mm in the shaft part of the stud; 3. Groove No. 3 with a depth of 1.7mm of the axial drilling surface of the stud;4. Flat–bottomed reflector Ø3.0mm (Seqv=7.0mm2) – for direct PEP control, quantity - 1 piece at a depth of 10mm; 5. End-to-end vertical drilling Ø4.0mm to adjust the depth gauge and the scanning speed. |
| НО-М60-ГЗЗ | TB0170125 | A unified tuning sample for adjusting the sensitivity of the ultrasonic inspection of the M60 stud (without axial drilling) of the GZZ flange connector in accordance with the norms of Table No. 12 NP-084-15. The material of the sample is 25X2M1F steel. Reflectors: 1. Groove No. 1 with a depth of 1.7mm in the threaded part of the stud; 2. Groove No. 2 with a depth of 1.7 mm in the shaft part of the stud; 3. Groove No. 3 with a depth of 1.7mm of the axial drilling surface of the stud;4. Flat–bottomed reflector Ø4.4mm (Seqv=15.0mm2 – for direct PEP control, quantity - 1 piece at a depth of 10mm; 5. End-to-end vertical drilling Ø4.0mm to adjust the depth gauge and the scanning speed. |
| НО-М64-КД | TB0170126 | Tuning sample for adjusting the sensitivity of ultrasonic inspection of the M64 stud (with axial drilling) of the CD flange connector in accordance with the norms of Table No. 12 NP-084-15. The material of the sample is 38KHN3MFA steel. |
| НО-М100-ГЦН-195 | TB0170127 | Tuning sample for adjusting the sensitivity of ultrasonic testing |
| НО Ду400-90-Б-Кмп-1 | TB0200010 |
- |
| НО Ду400-90-Б-Кмп-2 | TB0200011 |
- |
| НО Ду400х40-1 | TB0200012 |
- |
| НО Ду400х40-2 | TB0200013 |
- |
| НО САОЗ Дн351-1 | TB0200014 |
- |
| НО САОЗ Дн351-2 | TB0200015 |
- |
| НО-Ду-850-45-60-7 | TB0200019 |
- |